r1 - 04 Mar 2006 - NelsonFerraz

AUTHOR
SEE ALSO

NAME

perlnewmod - preparing a new module for distribution

DESCRIPTION

This document gives you some suggestions about how to go about writing Perl modules, preparing them for distribution, and making them available via CPAN. One of the things that makes Perl really powerful is the fact that Perl hackers tend to want to share the solutions to problems they've faced, so you and I don't have to battle with the same problem again. The main way they do this is by abstracting the solution into a Perl module. If you don't know what one of these is, the rest of this document isn't going to be much use to you. You're also missing out on an awful lot of useful code; consider having a look at the perlmod manpage, the perlmodlib manpage and the perlmodinstall manpage before coming back here. When you've found that there isn't a module available for what you're trying to do, and you've had to write the code yourself, consider packaging up the solution into a module and uploading it to CPAN so that others can benefit.

Warning

We're going to primarily concentrate on Perl-only modules here, rather than XS modules. XS modules serve a rather different purpose, and you should consider different things before distributing them - the popularity of the library you are gluing, the portability to other operating systems, and so on. However, the notes on preparing the Perl side of the module and packaging and distributing it will apply equally well to an XS module as a pure-Perl one.

What should I make into a module?

You should make a module out of any code that you think is going to be useful to others. Anything that's likely to fill a hole in the communal library and which someone else can slot directly into their program. Any part of your code which you can isolate and extract and plug into something else is a likely candidate. Let's take an example. Suppose you're reading in data from a local format into a hash-of-hashes in Perl, turning that into a tree, walking the tree and then piping each node to an Acme Transmogrifier Server. Now, quite a few people have the Acme Transmogrifier, and you've had to write something to talk the protocol from scratch - you'd almost certainly want to make that into a module. The level at which you pitch it is up to you: you might want protocol-level modules analogous to Net::SMTP which then talk to higher level modules analogous to Mail::Send. The choice is yours, but you do want to get a module out for that server protocol. Nobody else on the planet is going to talk your local data format, so we can ignore that. But what about the thing in the middle? Building tree structures from Perl variables and then traversing them is a nice, general problem, and if nobody's already written a module that does that, you might want to modularise that code too. So hopefully you've now got a few ideas about what's good to modularise. Let's now see how it's done.

Step-by-step: Preparing the ground

Before we even start scraping out the code, there are a few things we'll want to do in advance.

Look around: Dig into a bunch of modules to see how they're written. I'd suggest; starting with Text::Tabs, since it's in the standard; library and is nice and simple, and then looking at something a little; more complex like File::Copy. For object oriented; code, WWW::Mechanize or the Email::* modules provide some good; examples.; These should give you an overall feel for how modules are laid out and; written.
Check it's new: There are a lot of modules on CPAN, and it's easy to miss one that's; similar to what you're planning on contributing. Have a good plough; through the http://search.cpan.org and make sure you're not the one; reinventing the wheel!
Discuss the need: You might love it. You might feel that everyone else needs it. But there; might not actually be any real demand for it out there. If you're unsure; about the demand your module will have, consider sending out feelers; on the comp.lang.perl.modules newsgroup, or as a last resort, ask the; modules list at modules@perl.org. Remember that this is a closed list; with a very long turn-around time - be prepared to wait a good while for; a response from them.
Choose a name: Perl modules included on CPAN have a naming hierarchy you should try to; fit in with. See the perlmodlib manpage for more details on how this works, and; browse around CPAN and the modules list to get a feel of it. At the very; least, remember this: modules should be title capitalised, (This::Thing); fit in with a category, and explain their purpose succinctly.
Check again: While you're doing that, make really sure you haven't missed a module; similar to the one you're about to write.; When you've got your name sorted out and you're sure that your module is; wanted and not currently available, it's time to start coding.

Step-by-step: Making the module

Start with module-starter or h2xs

The module-starter utility is distributed as part of the

Module::Starter CPAN package. It creates a directory

with stubs of all the necessary files to start a new module, according

to recent ``best practice'' for module development, and is invoked from

the command line, thus:

    module-starter --module=Foo::Bar \

       --author="Your Name" --email=yourname@cpan.org

If you do not wish to install the Module::Starter

package from CPAN, h2xs is an older tool, originally intended for the

development of XS modules, which comes packaged with the Perl

distribution.

A typical invocation of h2xs for a pure Perl module is:

    h2xs -AX --skip-exporter --use-new-tests -n Foo::Bar

The -A omits the Autoloader code, -X omits XS elements,

--skip-exporter omits the Exporter code, --use-new-tests sets up a

modern testing environment, and -n specifies the name of the module.

Use strict and warnings

A module's code has to be warning and strict-clean, since you can't

guarantee the conditions that it'll be used under. Besides, you wouldn't

want to distribute code that wasn't warning or strict-clean anyway,

right?

Use Carp

The Carp module allows you to present your error messages from

the caller's perspective; this gives you a way to signal a problem with

the caller and not your module. For instance, if you say this:

    warn "No hostname given";

the user will see something like this:

    No hostname given at /usr/local/lib/perl5/site_perl/5.6.0/Net/Acme.pm

    line 123.

which looks like your module is doing something wrong. Instead, you want

to put the blame on the user, and say this:

    No hostname given at bad_code, line 10.

You do this by using Carp and replacing your warns with

carps. If you need to die, say croak instead. However, keep

warn and die in place for your sanity checks - where it really is

your module at fault.

Use Exporter - wisely!

Exporter gives you a standard way of exporting symbols and

subroutines from your module into the caller's namespace. For instance,

saying use Net::Acme qw(&frob) would import the frob subroutine.

The package variable @EXPORT will determine which symbols will get

exported when the caller simply says use Net::Acme - you will hardly

ever want to put anything in there. @EXPORT_OK, on the other hand,

specifies which symbols you're willing to export. If you do want to

export a bunch of symbols, use the %EXPORT_TAGS and define a standard

export set - look at the Exporter manpage for more details.

Use plain old documentation

The work isn't over until the paperwork is done, and you're going to

need to put in some time writing some documentation for your module.

module-starter or h2xs will provide a stub for you to fill in; if

you're not sure about the format, look at the perlpod manpage for an

introduction. Provide a good synopsis of how your module is used in

code, a description, and then notes on the syntax and function of the

individual subroutines or methods. Use Perl comments for developer notes

and POD for end-user notes.

Write tests

You're encouraged to create self-tests for your module to ensure it's

working as intended on the myriad platforms Perl supports; if you upload

your module to CPAN, a host of testers will build your module and send

you the results of the tests. Again, module-starter and h2xs

provide a test framework which you can extend - you should do something

more than just checking your module will compile.

Test::Simple and Test::More are good

places to start when writing a test suite.

Write the README

If you're uploading to CPAN, the automated gremlins will extract the

README file and place that in your CPAN directory. It'll also appear in

the main by-module and by-category directories if you make it onto

the modules list. It's a good idea to put here what the module actually

does in detail, and the user-visible changes since the last release.

Step-by-step: Distributing your module

Get a CPAN user ID: Every developer publishing modules on CPAN needs a CPAN ID. Visit; http://pause.perl.org/, select ``Request PAUSE Account'', and wait for; your request to be approved by the PAUSE administrators.
perl Makefile.PL; make test; make dist: Once again, module-starter or h2xs has done all the work for you.; They produce the standard Makefile.PL you see when you download and; install modules, and this produces a Makefile with a dist target.; Once you've ensured that your module passes its own tests - always a; good thing to make sure - you can make dist, and the Makefile will; hopefully produce you a nice tarball of your module, ready for upload.
Upload the tarball: The email you got when you received your CPAN ID will tell you how to; log in to PAUSE, the Perl Authors Upload SErver. From the menus there,; you can upload your module to CPAN.
Announce to the modules list: Once uploaded, it'll sit unnoticed in your author directory. If you want; it connected to the rest of the CPAN, you'll need to go to ``Register; Namespace`` on PAUSE. Once registered, your module will appear in the; by-module and by-category listings on CPAN.
Announce to clpa: If you have a burning desire to tell the world about your release, post; an announcement to the moderated comp.lang.perl.announce newsgroup.
Fix bugs!: Once you start accumulating users, they'll send you bug reports. If; you're lucky, they'll even send you patches. Welcome to the joys of; maintaining a software project...

voltar para o topo

AUTHOR

Simon Cozens, simon@cpan.org Updated by Kirrily ``Skud'' Robert, skud@cpan.org

voltar para o topo

Pesquisar

Documentação

Artigos

Planeta

Eventos

Comunidade